This store requires javascript to be enabled for some features to work correctly.

Featured on the hit TV show GUT JOB, found on HGTV and HULU!

Envisivent Removable Flush Mount Air Return, 14” x 8” (Drywall Opening)

Sale price

Regular price $89.44
( / )
Shipping calculated at checkout.

SKU: CB5018

Pickup available at Calgary Warehouse

Usually ready in 24 hours

Check availability at other stores

Calgary Warehouse

Pickup available, usually ready in 24 hours

3016 10 Avenue Northeast
Unit 115 (Pick up at rear of the building)
Calgary AB T2A 6A3
Canada

+18005905799

Richmond Hill Warehouse

Pickup available, usually ready in 24 hours

100 Granton Drive
Rear of the Warehouse, Dock #7 or #8
Richmond Hill ON L4B 1H7
Canada

+19056696336

Click here to be notified by email when Envisivent Removable Flush Mount Air Return, 14” x 8” (Drywall Opening) becomes available.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Crafted to serve as a refined alternative to a conventional vent cover, the Envisivent Removable Flush Mount Air Return is impeccably suited to replace a vent cover for a duct opening of 14” x 8”, 14” x 6” or 12” x 6”. Nestled within a 14" x 8" drywall opening, its design incorporates a removable front, presenting a contemporary aesthetic that effortlessly complements any home, office, or commercial space.

Easy to install, simply tape, mud, sand then paint directly over the already primed vent cover for that blended look you want for every room of your house. Made from a moisture, mold, and water-resistant material that is primed and ready to paint once installed. 

*To ensure you select the correct Envisivent product size, be sure to review our Sizing Guide in our Resource section.

  •  18 straight horizontal slots
  • Over 32 square inches (206 square cm) of open vent area
  • Moisture, mold, and water resistant
  • Machine-beveled outer edges for seamless finishing
  • Primed and ready to paint
  • Eco-friendly manufacturing and non-hazardous
  • Vent Cover Material: Triple Fibre Reinforced Cement Board
  • Designed to be installed with 1/2" or 5/8" thick drywall
Duct Opening/or Wall Cavity 14" x 8" 
Vented Opening 11.5” x 6”
Overall Dimensions 16” x 10.5” x 0.5"
Drywall Opening 13.5" x 8"
Sizing Guide Click here for Sizing Guide



Description

Crafted to serve as a refined alternative to a conventional vent cover, the Envisivent Removable Flush Mount Air Return is impeccably suited to replace a vent cover for a duct opening of 14” x 8”, 14” x 6” or 12” x 6”. Nestled within a 14" x 8" drywall opening, its design incorporates a removable front, presenting a contemporary aesthetic that effortlessly complements any home, office, or commercial space.

Easy to install, simply tape, mud, sand then paint directly over the already primed vent cover for that blended look you want for every room of your house. Made from a moisture, mold, and water-resistant material that is primed and ready to paint once installed. 

*To ensure you select the correct Envisivent product size, be sure to review our Sizing Guide in our Resource section.

Key Features
  •  18 straight horizontal slots
  • Over 32 square inches (206 square cm) of open vent area
  • Moisture, mold, and water resistant
  • Machine-beveled outer edges for seamless finishing
  • Primed and ready to paint
  • Eco-friendly manufacturing and non-hazardous
  • Vent Cover Material: Triple Fibre Reinforced Cement Board
  • Designed to be installed with 1/2" or 5/8" thick drywall
Sizing
Duct Opening/or Wall Cavity 14" x 8" 
Vented Opening 11.5” x 6”
Overall Dimensions 16” x 10.5” x 0.5"
Drywall Opening 13.5" x 8"
Sizing Guide Click here for Sizing Guide



Air Flow Data & Specs

Air Flow Data

Air Return Sizing Guide

Specification Sheet

Installation Instructions

MSDS Sheet

    Crafted to serve as a refined alternative to a conventional vent cover, the Envisivent Removable Flush Mount Air Return is impeccably suited to replace a vent cover for a duct opening of 14” x 8”, 14” x 6” or 12” x 6”. Nestled within a 14" x 8" drywall opening, its design incorporates a removable front, presenting a contemporary aesthetic that effortlessly complements any home, office, or commercial space.

    Easy to install, simply tape, mud, sand then paint directly over the already primed vent cover for that blended look you want for every room of your house. Made from a moisture, mold, and water-resistant material that is primed and ready to paint once installed. 

    *To ensure you select the correct Envisivent product size, be sure to review our Sizing Guide in our Resource section.

    •  18 straight horizontal slots
    • Over 32 square inches (206 square cm) of open vent area
    • Moisture, mold, and water resistant
    • Machine-beveled outer edges for seamless finishing
    • Primed and ready to paint
    • Eco-friendly manufacturing and non-hazardous
    • Vent Cover Material: Triple Fibre Reinforced Cement Board
    • Designed to be installed with 1/2" or 5/8" thick drywall
    Duct Opening/or Wall Cavity 14" x 8" 
    Vented Opening 11.5” x 6”
    Overall Dimensions 16” x 10.5” x 0.5"
    Drywall Opening 13.5" x 8"
    Sizing Guide Click here for Sizing Guide