This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.
Description
Add sophistication to your home with the Envisivent Removable Flush Mount Air Return Vent. The vent is designed to replace the standard cover for a 6" x 6" duct opening (if applicable)/or wall cavity and fits into a drywall opening of 8" x 8". Featuring directionally horizontal slots and a seamless finish that blends into interior walls to give your home or office space a contemporary aesthetic.
Envisivent Removable Air Return Vents can also accommodate air filters with the use of our 1" or 2" Air Filter Clips. IMPORTANT: the size of your air filter should align with the size of the Slotted Area of the vent (refer to the "Sizing" section on the product page). If the air filter is too large it will not properly fit in behind the vent cover. Simply attach the Air Filter Clips to the inner lip of the Air Return vent frame and slide your air filter into place behind the vent cover. Shop our Air Filter Clips
*To ensure you select the correct Envisivent product size, be sure to review our Sizing Guide in our Resource section.
Key Features
- 8 straight horizontal (or vertical) slots
- Over 14 square inches (90 square cm) of open vent area
- 4 magnetic tabs on the vent cover for easy removal
- Metal frame screws onto the face of your drywall
- Moisture, mold, and water resistant
- Primed and ready to paint
- Eco-friendly manufacturing and non-hazardous
- Frame Material: Satin Coat Galvanized Steel
- Vent Cover Material: Triple Fibre Reinforced Cement Board
- Designed to be installed with 1/2" or 5/8" thick drywall
Sizing
| Drywall Opening |
8" x 8" |
| Vent Cover |
7.5” x 7.5” |
| Slotted Area |
5.613” x 5.613" |
| Number of Slots | 8 |
| Overall Dimensions | 10.125" x 10.125" x 0.5" |
| Sizing Guide | Click here for Sizing Guide |
Specs, Install & Air Flow Data
Sizing Guide
Specification Sheet
Installation Instructions
MSDS Sheet