This store requires javascript to be enabled for some features to work correctly.

Featured on the hit TV show GUT JOB, found on HGTV and HULU!

Envisivent Removable Flush Mount Wall/Ceiling Air Supply, 10” x 6” (Duct Opening)/Requires 11" x 7" Drywall Opening

Sale price

Regular price $97.95
( / )
Shipping calculated at checkout.

SKU: CB5023

Pickup available at Calgary Warehouse

Usually ready in 24 hours

Check availability at other stores

Calgary Warehouse

Pickup available, usually ready in 24 hours

3016 10 Avenue Northeast
Unit 115 (Pick up at rear of the building)
Calgary AB T2A 6A3
Canada

+18005905799

Richmond Hill Warehouse

Pickup available, usually ready in 24 hours

100 Granton Drive
Rear of the Warehouse, Dock #7 or #8
Richmond Hill ON L4B 1H7
Canada

+19056696336

Click here to be notified by email when Envisivent Removable Flush Mount Wall/Ceiling Air Supply, 10” x 6” (Duct Opening)/Requires 11" x 7" Drywall Opening becomes available.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Meet the Envisivent Flush Mount Removable Air Supply Vent, 10” x 6 (Duct Opening). An air supply vent that adds a high level of sophistication to any interior room, saying good-bye to those standard metal air supply vents that stick out of the wall, taking away from any design.

This air supply vent is created with a magnetic front, making it easy to remove when needed to adjust airflow as desired. 

Made from a moisture, mold, and water-resistant material, the air supply vent from Envisivent is easy to install; simply tape, mud, sand then paint directly over the already primed vent. The perfect addition to any room, the Envisivent air supply vent blends into any interior wall or ceiling.

*To ensure you select the correct Envisivent product size, be sure to review our Sizing Guide in our Resource section.

  • Mud-in flush mount/ideal for wall or ceiling
  • 13 rectangular straight vertical slots
  • Over 16 square inches (103 square cm) of open vent area
  • 4 magnetic tabs on the vent cover for easy removal
  • Metal frame screws onto the face of your drywall
  • 18 gauge galvanized satin coat adjustable diffuser to control amount of air flow (does not control direction of air flow)
  • Moisture, mold, and water-resistant
  • Primed and ready to paint
  • Eco-friendly manufacturing and non-hazardous
  • Frame Material: Satin Coat Galvanized Steel         
  • Vent Cover Material: Triple Fibre Reinforced Cement Board
  • Designed to be installed with 1/2" or 5/8" thick drywall
Duct Opening 10" x 6"
Drywall Opening 11" x 7"
Vent Cover 11" x 7"
Vented Opening 9" x 5”  
Overall Dimensions with Frame 13.5” x 9.5” x 0.5"
Sizing Guide Click here for Sizing Guide

Description

Meet the Envisivent Flush Mount Removable Air Supply Vent, 10” x 6 (Duct Opening). An air supply vent that adds a high level of sophistication to any interior room, saying good-bye to those standard metal air supply vents that stick out of the wall, taking away from any design.

This air supply vent is created with a magnetic front, making it easy to remove when needed to adjust airflow as desired. 

Made from a moisture, mold, and water-resistant material, the air supply vent from Envisivent is easy to install; simply tape, mud, sand then paint directly over the already primed vent. The perfect addition to any room, the Envisivent air supply vent blends into any interior wall or ceiling.

*To ensure you select the correct Envisivent product size, be sure to review our Sizing Guide in our Resource section.

Key Features
  • Mud-in flush mount/ideal for wall or ceiling
  • 13 rectangular straight vertical slots
  • Over 16 square inches (103 square cm) of open vent area
  • 4 magnetic tabs on the vent cover for easy removal
  • Metal frame screws onto the face of your drywall
  • 18 gauge galvanized satin coat adjustable diffuser to control amount of air flow (does not control direction of air flow)
  • Moisture, mold, and water-resistant
  • Primed and ready to paint
  • Eco-friendly manufacturing and non-hazardous
  • Frame Material: Satin Coat Galvanized Steel         
  • Vent Cover Material: Triple Fibre Reinforced Cement Board
  • Designed to be installed with 1/2" or 5/8" thick drywall
Sizing
Duct Opening 10" x 6"
Drywall Opening 11" x 7"
Vent Cover 11" x 7"
Vented Opening 9" x 5”  
Overall Dimensions with Frame 13.5” x 9.5” x 0.5"
Sizing Guide Click here for Sizing Guide

Specs, Install & Air Flow Data

Air Flow Data 

Air Supply Sizing Guide

Specification Sheet

Installation Instructions

MSDS Sheet

Meet the Envisivent Flush Mount Removable Air Supply Vent, 10” x 6 (Duct Opening). An air supply vent that adds a high level of sophistication to any interior room, saying good-bye to those standard metal air supply vents that stick out of the wall, taking away from any design.

This air supply vent is created with a magnetic front, making it easy to remove when needed to adjust airflow as desired. 

Made from a moisture, mold, and water-resistant material, the air supply vent from Envisivent is easy to install; simply tape, mud, sand then paint directly over the already primed vent. The perfect addition to any room, the Envisivent air supply vent blends into any interior wall or ceiling.

*To ensure you select the correct Envisivent product size, be sure to review our Sizing Guide in our Resource section.

  • Mud-in flush mount/ideal for wall or ceiling
  • 13 rectangular straight vertical slots
  • Over 16 square inches (103 square cm) of open vent area
  • 4 magnetic tabs on the vent cover for easy removal
  • Metal frame screws onto the face of your drywall
  • 18 gauge galvanized satin coat adjustable diffuser to control amount of air flow (does not control direction of air flow)
  • Moisture, mold, and water-resistant
  • Primed and ready to paint
  • Eco-friendly manufacturing and non-hazardous
  • Frame Material: Satin Coat Galvanized Steel         
  • Vent Cover Material: Triple Fibre Reinforced Cement Board
  • Designed to be installed with 1/2" or 5/8" thick drywall
Duct Opening 10" x 6"
Drywall Opening 11" x 7"
Vent Cover 11" x 7"
Vented Opening 9" x 5”  
Overall Dimensions with Frame 13.5” x 9.5” x 0.5"
Sizing Guide Click here for Sizing Guide