This store requires javascript to be enabled for some features to work correctly.

As seen on the hit TV show GUT JOB (Hulu) and featured in the Home Builder Magazine!

Envisivent Removable Flush Mount Wall Air Return, 30” x 8” (Duct Opening)

Sale price

Regular price $137.95
( / )
Shipping calculated at checkout.

Pickup available at Calgary Warehouse

Usually ready in 24 hours

Check availability at other stores

Calgary Warehouse

Pickup available, usually ready in 24 hours

3016 10 Avenue Northeast
Unit 115 (Pick up at rear of the building)
Calgary AB T2A 6A3
Canada

+18005905799

Richmond Hill Warehouse

Pickup available, usually ready in 24 hours

100 Granton Drive
Rear of the Warehouse, Dock #7 or #8
Richmond Hill ON L4B 1H7
Canada

+19056696336

Click here to be notified by email when Envisivent Removable Flush Mount Wall Air Return, 30” x 8” (Duct Opening) becomes available.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Envisivent's removable air return sits completely flush against your wall creating a blended smooth aesthetic. The vent cover is completely removable and is meant to replace a vent cover for a 30" x 8" duct opening (if applicable) or wall cavity and fits into a drywall opening of 29.75" x 10".

Envisivent vent covers fit the depth of standard drywall and are easy to install, simply tape, mud, sand, and then paint directly over the already primed vent cover for that blended look you want for every room of your house.

Envisivent Removable Air Return Vents can also accommodate 1” and 2” Air Filters. Simply attach the clips to the inner lip of the Air Return vent frame and slide your air filter into place behind the vent cover.  Shop our Air Filter Clips

*Not suitable for ceiling installation* (contact us for options). 

*To ensure you select the correct Envisivent product size, be sure to review our Sizing Guide in our Resource section.

  • 48 angled horizontal slots
  • Over 90 square inches (580 square cm) of open vent area
  • 4 magnetic tabs on the vent cover for easy removal
  • Moisture, mold, and water resistant
  • Primed and ready to paint
  • Eco-friendly manufacturing and non-hazardous
  • Frame Material: Satin Coat Galvanized Steel
  • Vent Cover Material: Triple Fibre Reinforced Cement Board
Duct Opening/or Wall Cavity 30" x 8"
Drywall Opening 29.75" x 10"
Vent Cover 29.37” x 9.625”
Vented Opening 28” x 8”
Overall Dimensions 32” x 12.25 x 0.5" 
Sizing Guide Click here for Sizing Guide


Description

Envisivent's removable air return sits completely flush against your wall creating a blended smooth aesthetic. The vent cover is completely removable and is meant to replace a vent cover for a 30" x 8" duct opening (if applicable) or wall cavity and fits into a drywall opening of 29.75" x 10".

Envisivent vent covers fit the depth of standard drywall and are easy to install, simply tape, mud, sand, and then paint directly over the already primed vent cover for that blended look you want for every room of your house.

Envisivent Removable Air Return Vents can also accommodate 1” and 2” Air Filters. Simply attach the clips to the inner lip of the Air Return vent frame and slide your air filter into place behind the vent cover.  Shop our Air Filter Clips

*Not suitable for ceiling installation* (contact us for options). 

*To ensure you select the correct Envisivent product size, be sure to review our Sizing Guide in our Resource section.

Key Features
  • 48 angled horizontal slots
  • Over 90 square inches (580 square cm) of open vent area
  • 4 magnetic tabs on the vent cover for easy removal
  • Moisture, mold, and water resistant
  • Primed and ready to paint
  • Eco-friendly manufacturing and non-hazardous
  • Frame Material: Satin Coat Galvanized Steel
  • Vent Cover Material: Triple Fibre Reinforced Cement Board
Sizing
Duct Opening/or Wall Cavity 30" x 8"
Drywall Opening 29.75" x 10"
Vent Cover 29.37” x 9.625”
Vented Opening 28” x 8”
Overall Dimensions 32” x 12.25 x 0.5" 
Sizing Guide Click here for Sizing Guide


Air Flow Data & Specs

Air flow Data

Air Return Sizing Guide

Specification Sheet

Installation Instructions

MSDS Sheet

Accessories

Air Filter Clips

Envisivent's removable air return sits completely flush against your wall creating a blended smooth aesthetic. The vent cover is completely removable and is meant to replace a vent cover for a 30" x 8" duct opening (if applicable) or wall cavity and fits into a drywall opening of 29.75" x 10".

Envisivent vent covers fit the depth of standard drywall and are easy to install, simply tape, mud, sand, and then paint directly over the already primed vent cover for that blended look you want for every room of your house.

Envisivent Removable Air Return Vents can also accommodate 1” and 2” Air Filters. Simply attach the clips to the inner lip of the Air Return vent frame and slide your air filter into place behind the vent cover.  Shop our Air Filter Clips

*Not suitable for ceiling installation* (contact us for options). 

*To ensure you select the correct Envisivent product size, be sure to review our Sizing Guide in our Resource section.

  • 48 angled horizontal slots
  • Over 90 square inches (580 square cm) of open vent area
  • 4 magnetic tabs on the vent cover for easy removal
  • Moisture, mold, and water resistant
  • Primed and ready to paint
  • Eco-friendly manufacturing and non-hazardous
  • Frame Material: Satin Coat Galvanized Steel
  • Vent Cover Material: Triple Fibre Reinforced Cement Board
Duct Opening/or Wall Cavity 30" x 8"
Drywall Opening 29.75" x 10"
Vent Cover 29.37” x 9.625”
Vented Opening 28” x 8”
Overall Dimensions 32” x 12.25 x 0.5" 
Sizing Guide Click here for Sizing Guide