This store requires javascript to be enabled for some features to work correctly.

Featured on the hit TV show GUT JOB, found on HGTV and HULU!

Envisivent Removable Flush Mount Air Return, 14" x 24" (Duct Opening)/Requires 16" x 26" Drywall Opening

Sale price

Regular price $209.95
( / )
Shipping calculated at checkout.

SKU: CB5015

Pickup available at Calgary Warehouse

Usually ready in 24 hours

Check availability at other stores

Calgary Warehouse

Pickup available, usually ready in 24 hours

3016 10 Avenue Northeast
Unit 115 (Pick up at rear of the building)
Calgary AB T2A 6A3
Canada

+18005905799

Richmond Hill Warehouse

Pickup available, usually ready in 24 hours

100 Granton Drive
Rear of the Warehouse, Dock #7 or #8
Richmond Hill ON L4B 1H7
Canada

+19056696336

Click here to be notified by email when Envisivent Removable Flush Mount Air Return, 14" x 24" (Duct Opening)/Requires 16" x 26" Drywall Opening becomes available.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Clean and classic, featuring a completely removable front that utilizes magnetic technology. The Envisivent Removable Air Return Vent creates a smooth design for a more contemporary aesthetic, without the bulk of plastic or the hindrance of using visible screws. Meant to replace a vent cover for a 14" x 24" duct opening (if applicable) or wall cavity and fits into a 16" x 26" drywall opening. 

Envisivent vent covers fit the depth of standard drywall creating a completely flush mount finish. Easy to install, simply tape, mud, sand, and then paint directly over the already primed vent cover for that blended look you want for every room of your house.

Envisivent Removable Air Return Vents can also accommodate 1” and 2” Air Filters. Simply attach the clips to the inner lip of the Air Return vent frame and slide your air filter into place behind the vent cover.  Shop our Air Filter Clips

THIS ITEM IS NOT SUITABLE FOR CEILING INSTALLATION WITHOUT THE USE OF OUR CEILING CLIPS WHICH CAN BE ORDERED HERE

  • Two rows of 34 straight horizontal slots, totaling 68 slots
  • Over 124 square inches (800 square cm) of open vent area
  • 4 magnetic tabs on the vent cover for easy removal
  • Metal frame screws onto the face of your drywall
  • Moisture, mold, and water resistant
  • Primed and ready to paint
  • Eco-friendly manufacturing and non-hazardous
  • Frame Material: Satin Coat Galvanized Steel
  • Vent Cover Material: Triple Fibre Reinforced Cement Board
  • Designed to be installed with 1/2" or 5/8" thick drywall

 

Duct Opening/Wall Cavity 14" x 24" 
Drywall Opening 16" x 26"
Vent Cover
15.875" x 25.875"
Slotted Area
23.75” x 13.75”
Number of Slots 68 slots total
Overall Dimensions
18.5" x 28.5” x 0.5"
Sizing Guide Click here for Sizing Guide

 

Clean and classic, featuring a completely removable front that utilizes magnetic technology. The Envisivent Removable Air Return Vent creates a smooth design for a more contemporary aesthetic, without the bulk of plastic or the hindrance of using visible screws. Meant to replace a vent cover for a 14" x 24" duct opening (if applicable) or wall cavity and fits into a 16" x 26" drywall opening. 

Envisivent vent covers fit the depth of standard drywall creating a completely flush mount finish. Easy to install, simply tape, mud, sand, and then paint directly over the already primed vent cover for that blended look you want for every room of your house.

Envisivent Removable Air Return Vents can also accommodate 1” and 2” Air Filters. Simply attach the clips to the inner lip of the Air Return vent frame and slide your air filter into place behind the vent cover.  Shop our Air Filter Clips

THIS ITEM IS NOT SUITABLE FOR CEILING INSTALLATION WITHOUT THE USE OF OUR CEILING CLIPS WHICH CAN BE ORDERED HERE

Key Features
  • Two rows of 34 straight horizontal slots, totaling 68 slots
  • Over 124 square inches (800 square cm) of open vent area
  • 4 magnetic tabs on the vent cover for easy removal
  • Metal frame screws onto the face of your drywall
  • Moisture, mold, and water resistant
  • Primed and ready to paint
  • Eco-friendly manufacturing and non-hazardous
  • Frame Material: Satin Coat Galvanized Steel
  • Vent Cover Material: Triple Fibre Reinforced Cement Board
  • Designed to be installed with 1/2" or 5/8" thick drywall

 

Duct Opening/Wall Cavity 14" x 24" 
Drywall Opening 16" x 26"
Vent Cover
15.875" x 25.875"
Slotted Area
23.75” x 13.75”
Number of Slots
68 slots total
Overall Dimensions
18.5" x 28.5” x 0.5"
Sizing Guide Click here for Sizing Guide

 

Specs, Install & Air Flow Data

Air Flow Data

Sizing Guide

Specification Sheet

Installation Instructions

MSDS Sheet

Accessories

Air Filter Clips

 

Clean and classic, featuring a completely removable front that utilizes magnetic technology. The Envisivent Removable Air Return Vent creates a smooth design for a more contemporary aesthetic, without the bulk of plastic or the hindrance of using visible screws. Meant to replace a vent cover for a 14" x 24" duct opening (if applicable) or wall cavity and fits into a 16" x 26" drywall opening. 

Envisivent vent covers fit the depth of standard drywall creating a completely flush mount finish. Easy to install, simply tape, mud, sand, and then paint directly over the already primed vent cover for that blended look you want for every room of your house.

Envisivent Removable Air Return Vents can also accommodate 1” and 2” Air Filters. Simply attach the clips to the inner lip of the Air Return vent frame and slide your air filter into place behind the vent cover.  Shop our Air Filter Clips

THIS ITEM IS NOT SUITABLE FOR CEILING INSTALLATION WITHOUT THE USE OF OUR CEILING CLIPS WHICH CAN BE ORDERED HERE

  • Two rows of 34 straight horizontal slots, totaling 68 slots
  • Over 124 square inches (800 square cm) of open vent area
  • 4 magnetic tabs on the vent cover for easy removal
  • Metal frame screws onto the face of your drywall
  • Moisture, mold, and water resistant
  • Primed and ready to paint
  • Eco-friendly manufacturing and non-hazardous
  • Frame Material: Satin Coat Galvanized Steel
  • Vent Cover Material: Triple Fibre Reinforced Cement Board
  • Designed to be installed with 1/2" or 5/8" thick drywall

 

Duct Opening/Wall Cavity 14" x 24" 
Drywall Opening 16" x 26"
Vent Cover
15.875" x 25.875"
Slotted Area
23.75” x 13.75”
Number of Slots 68 slots total
Overall Dimensions
18.5" x 28.5” x 0.5"
Sizing Guide Click here for Sizing Guide